Advertisement
prompt, along with buzzing. Meanwhile, the aircraft returns automatically.
1.18.2.1.3 Other Settings
Select "Settings > Flight Control Settings > Fence Settings".
Set radius and altitude.
Set trigger distance.
For example, when the fence type is set as radius + altitude, the radius is set as A meters and
altitude is set as B meters, and if the trigger distance is set as C meters, then it will trigger RTH
or landing when the aircraft is (A-C) meters away from the HOME point horizontally or flight
altitude exceeds (B-C) meters; the aircraft will implement the action of RTH or landing.
1.18.2.2 Enable Electronic Fence
Enable electronic fence after setting fence area.
Select "Settings > Flight Control Settings", enable electronic fence on the right of the "Fence
Enable".
1.18.3 Preview Settings
Set resolution, frame rate and max. bandwidth of preview image according to requirements.
Select "Settings > Flight Control Settings > Preview Settings" and enter the preview
Step 1
setting interface, as shown in Figure 0-26.
Select "Settings > Flight Control Settings > Preview Settings > Image Transmission
Step 2
Settings".
Figure 0-25
Figure 0-26
65
Advertisement
