Advertisement
Level 1 Menu
General
On settings interface, click
3.3.2.1.1 Locking Mode
Click it to select locking mode of the aircraft on the popped up dialog box, as shown in
Figure 0-18.
Level 2 Menu
Level 3 Menu
Image
Advanced
settings
Aircraft
firmware
-
upgrade
APP upgrade
-
Geomagnetic
calibration
Acceleromete
r calibration
Offline map
Brightness
Other
Date and time
Network
setting
Language
Storage
setting
Hardware
About
version
Table 0-8
to return to the previous menu and click
Function
Set
brightness,
contrast,
sharpness and gamma value.
Please refer to "1.18.4.3 Image Settings"
for details.
Check firmware status and upgrade.
Please refer to "1.19 Firmware Update"
for details.
Check APP status and upgrade.
Please refer to "1.20.1 APP Update" for
details.
Calibrate geomagnetism.
Please refer to "1.13.4 Geomagnetic
Abnormity" for details.
Calibrate accelerometer.
Please refer to "1.13.2 Accelerometer
Calibration" for details.
Add or delete offline map.
Please refer to "1.20.2 Download and
Update Offline Map of Remote Control"
for details.
Adjust brightness of tablet PC.
Please refer to "1.18.5.1.3 Brightness" for
details.
Set the date and time of remote control.
Please refer to "1.18.5.1.4 Date and time"
for details.
Set networking mode.
Please refer to "1.18.5.1.1 Network
Settings" for details.
Set software language of remote control.
Please refer to "1.18.5.1.5 Language" for
details.
View total storage space of Micro SD card
and the space occupied by every part.
Please refer to "1.18.5.1.2 Micro SD
Settings" for details.
Display hardware info.
saturation,
to exit settings.
20
Advertisement
