Advertisement
4.3.1.1 Waypoints
Select "Waypoints".
Step 1
The system displays "Waypoints" interface, as shown in Figure 0-12.
Check total route length, estimated flight time and set "Cycle Flight" at the bottom of the
interface.
Step 2
Click the map and the position can be set as a waypoint; several waypoints can be
connected together and form a route.
Check total route length, estimated flight time and set "Cycle Flight" at the bottom of the
interface.
Step 3
Click a waypoint and it will become red. Waypoint setting interface will display on the
right of the interface, as shown in Figure 0-13.
Figure 0-12
55
Advertisement
