Demount Ptz Camera; Install Ptz Camera - Dahua NAVIGATOR X650 User Manual

 Please implement demounting step first and then connection step when the PTZ camera
needs to be replaced.
 It only needs to implement demounting step when the aircraft flies directly without PTZ
camera.

1.9.1 Demount PTZ Camera

Step 1 Loosen 4 mounting screws, as shown in Figure 0-9.
Step 2 Take down PTZ camera.

1.9.2 Install PTZ Camera

Step 1 Insert the upper port on the vibration damper plate of the PTZ camera into
corresponding port at the bottom of the aircraft, as shown in Figure 0-10.
Step 2 Align 4 mounting screws with the hole positions at the bottom of the aircraft, and tighten
the screws.
Figure 0-9
Figure 0-10
31