Advertisement
Step 2
Set parameters according to actual needs. Please refer to Table 0-3 for details.
Parameter
PTZ Mode
PTZ Position
Throwing
Click key A on the remote control, to carry out PTZ control.
1.11.5.3 Image Transfer
Set resolution ratio, frame rate and maximum bandwidth of preview image according to needs.
Select "Image Transfer", and the system enters "Image Transfer" interface, as shown in
Step 1
Figure 0-23.
Figure 0-22
Note
View present mode of PTZ.
Set PTZ position, including PTZ 90 degrees and PTZ center.
PTZ 90 degrees: the camera is vertically downward.
PTZ center: the camera lens faces the front.
Set throwing, including throwing device A and throwing device B.
Table 0-3
38
Advertisement
