Bukh D4 Operator's Manual page 81

In Case of Emergency
1
4
P 00 22617
82
2
3
5
1 Unscrew and remove the plug (1). Disconnect the
cable by pressing down the lock (2) and at the same
time wiggle the connector in a forward position.
2 Connect the switch (3) and fit the crank tool (4).
3 Press down the switch button (5) and keep it
pressed while carefully turning the crank tool.
IMPORTANT:
Do not force the crank tool beyond the end position,
it could damage the Electrical Rudder Actuator.
NOTICE! Do not use the crank tool while rampage.
47708085 11-2016 © Bukh