Side Mounted Levers - Bukh D4 Operator's Manual

Instruments and Controls
36
6
Neutral position. The symbol shows that the drive/
reverse gear is disengaged.
7
The warning triangle lights up if the system
discovers a fault; refer to Fault Handling, page 67
for information.
The warning triangle lights up on the same side as
the driveline with the indicated fault.
8 This function is not available.
9 TRIM ASSIST (Optional)
The Power Trim Assistant, PTA, adjusts the trim
angel automatically according to engine speed
(rpm), see Power Trim Assistant, page 32 for
information.
Depending on installation this button can switch on/
off the Interceptor System , refer to
Optional, page 52 for more information.
10 TRIM (Optional)
Trim the drive out//in.
For twin engine installations the adjustment of the
drives are synchronized. For further information
see Instruments and Controls, page 30.

Side mounted levers

1 TRIM
Trim the drive out//in.
For twin engine installations the adjustment of the
drives are synchronized.
For further information on Power Trim see
Instruments and Controls, page 30.
2
Neutral position. The symbol shows that the drive/
reverse gear is disengaged.
The warning triangle lights up if the system
discovers a fault; refer to Fault Handling, page 67
for information.
This function is not available.
3 + / -
Fine tune the locked engine speed for tow mode (4)
or cruise control (5) by increasing (+) or reducing (-)
engine rpm.
4 TOW MODE
Accelerates the boat to a preset rpm.
Switch on toe mode by pressing the button.
Fine tune the locked engine speed by increasing (+)
or reducing (-) engine rpm with button (3).
47708085 11-2016 © Bukh