Pairing Your Bluetooth Device With Juno - FrontRow juno Quick Start Manual

Pairing your Bluetooth
*Requires FrontRow Juno Bluetooth Audio Receiver installed
Pairing setup
1. Press the Bluetooth button on the back of
the Juno Tower to activate pairing mode.
2. Juno will play a tone and the button will
flash blue.
3. Go to the Bluetooth settings on your
computer, phone, or tablet and look for
FrontRow Juno xxxx (a 4-digit number),
then pair with the device.
Once device is paired:
1. When connected, the Juno will play a chime tone
and the Bluetooth button will be solid blue.
2. Your device is now ready to stream music
and more!
NOTE:
• You only need to pair each device once.
• You can connect up to two devices at once,
but only one can stream at a time.
• You can disconnect and re-connect to Juno at any time using your device settings or
quick access menus (varies by device).
• I f you go out of range, you will need to re-connect when you return.
device with Juno*
®