Quick Start; Connect The Juno Tower To Your Computer - FrontRow juno Quick Start Manual

Quick Start

Use this guide for help with setting up Juno
For more detailed information, see the Teacher Edition Software User Guide and the
Juno System User guides.
Set your system up in 3 easy steps!
1. Connect cables.
2. Install software.
3. Activate the software license.

1. Connect the Juno Tower to Your Computer

1. Connect the 3 cables shown below between your Juno Tower and
the computer.*
Computer
* The 3.5mm to 3.5mm and USB cables are only necessary if using the optional Teacher Edition
Lesson Capture Software. The 3.5mm to RCA cable is for audio playback from the computer
through the Juno Tower.
and getting started with Lesson Capture.
®
3.5mm – 3.5mm
Line / Mic In
Line Out
audio cable*
3.5mm – RCA
audio cable
USB cable*
Audio Out
Audio In