Using Voice Commands - FrontRow juno Quick Start Manual

Using Voice Commands

To issue a voice command:
1. Press and hold the One-Touch button on the Pendant Microphone.
2. Wait for voice command tone and Tower LCD background to turn green.
3. Keeping the button pressed, say one of the commands below.
4. Wait for confirmation tone and Tower LCD background to return to white.
5. Release button.
Say: To:
Increase Increase the volume by 2 steps
Reduce
Reduce the volume by 2 steps
LCD
Toggle Juno Tower LCD lock on/off
Begin
Begin or resume a paused recording
Suspend
Pause a recording
Finish
Stop, encode and automatically name a recording based on your personalized settings
Commands available with Juno Connect Module installed
Say:
Intercom
Power Up
Shut Down
Freeze Screen
Blank Screen
Your Juno Tower shipped with English - United States / Canada voice commands.
To localize your voice commands for different languages or regions:
Windows
1. Under the Tower menu click Settings.
2. Click the Change Language button on the Information tab.
3. Choose language / region and click OK.
4. Click Update and follow on the screen / Tower LCD prompts.
Mac OS
1. Under the FrontRow Teacher Edition menu, click Preferences.
2. On the Juno Tower tab, click the dropdown next to Country / Language and choose
the appropriate language / region.
3. Click Change Language to confirm and follow the on screen / Tower LCD prompts.
To:
Make an intercom call request
Turn display on
Turn display off
Freeze/Unfreeze projector image
Blank/Show projector image
Say: To:
Source One Switch AV input
Source Two Switch AV input
Source Three
Switch AV input
Source Four Switch AV input
Source Five Switch AV input