Clear-Com FreeSpeak II Integra User Manual page 70

If the IPT is using a PoE connection, adding a local power supply interrupts the
l
power supply for 1 to 2 seconds.
If the IPT is using both local and PoE, if you remove the local power supply
l
connection, the IPT power supply is interrupted for 1 to 2 seconds and then
continues using the PoE supply.
If the IPT is using both local and PoE, if you remove the PoE connection, the
l
IPT continues to operate without interruption using the local power supply.
6.1.12 Upgrading the FS II IP Transceiver firmware
You can upgrade the transceiver firmware by:
l
l
6.1.13 Upgrading from the matrix
1. Right-click on the Frame in the Layout window, and then select Firmware >
Update Firmware. The Update Firmware Wizard appears.
2. Select Next. The following screen appears:
Note: For IPT Transcievers, the Auto/Promoted radio button is always set to
3. Select the Wireless radio button.
4. Select Next, and then browse to the upgrade file (.tar.gz) and select Open. The
upgrade file is loaded to the transceiver, and the transceiver restarts.
You can track the status of the download in the EHX Event Log.
Page 70
Upgrading from the matrix (the file extension for the upgrade firmware is
.fww)
Using a USB connection (the file extension for the upgrade firmware is .fws)
Auto.
User Guide| FreeSpeak II Integra