License Plate Lamp
To replace the license plate lamp bulb:
1. Remove the two screws holding the license plate
lamp assembly to the fascia.
2. Turn and pull the license plate lamp forward
through the fascia opening.
5-44
3. Turn the bulb socket counterclockwise and pull
the bulb straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the lamp
assembly.
Replacement Bulbs
Exterior Lamp
Back-up Lamp
License Plate Lamp and
Rear Sidemarker Lamp
Turn Signal Lamp
For replacement bulbs not listed here, contact your
dealer/retailer.
Bulb Number
921
168
3156