Saturn 2008 AURA Green Line Hybrid Owner's Manual page 128

Reducing Speed While Using
Cruise Control
If the cruise control system is already engaged:
•
Push and hold the SET until the desired
lower speed is reached, then release it.
•
To slow down in very small amounts,
briefly push the SET . Each time this
is done, the vehicle goes about
1 mph (1.6 km/h) slower.
Passing Another Vehicle While Using
Cruise Control
Use the accelerator pedal to increase the vehicle's
speed. When you take your foot off the pedal,
the vehicle slows down to the previously set
cruise control speed.
3-12
Using Cruise Control on Hills
How well your cruise control works on hills depends
upon the vehicle's speed, load, and the steepness of the
hills. When going up steep hills, you might have to
step on the accelerator pedal to maintain the vehicle's
speed. When going downhill, you might have to brake or
shift to a lower gear to keep the vehicle at a lower
speed. When the brakes are applied this ends the cruise
control. Many drivers find this to be too much trouble
and do not use cruise control on steep hills.
Ending Cruise Control
There are two ways to disengage the cruise control:
•
Step lightly on the brake pedal; when cruise control
disengages, the cruise symbol in the instrument
panel cluster goes out.
I
•
Press the button, to turn off the cruise control
system.
Erasing Speed Memory
The cruise control set speed memory is erased when
the cruise control or the ignition is turned off.