License Plate Lamp
To replace the license plate lamp bulb:
1. Remove the two screws holding the license plate
lamp assembly to the fascia.
2. Turn and pull the license plate lamp forward
through the fascia opening.
3. Turn the bulb socket counterclockwise and pull the
bulb straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the lamp
assembly.
5-48
Replacement Bulbs
Exterior Lamp
Back-Up Lamp, Stoplamp,
Taillamp and Turn Signal
Fog Lamp
Front Parking Lamp
(In Headlamp Assembly)
Front Parking Lamp/
Turn Signal Lamp
(Below Headlamp Assembly)
Front and Rear Sidemarker Lamp
License Plate Lamp
Headlamps
High-Beam Headlamp
Low-Beam Headlamp
For replacement bulbs not listed here, contact your
dealer/retailer.
Bulb Number
3157K
H11
W5W-B50X2
5702KA
194
168
H9
H11