Page 1
SERVICE MANUAL BINKS MODEL 85-214 & 85-215 1/4" AIR PRESSURE REGULATOR Flow Coefficient (Cv) .60 Maximum CAUTION Do not immerse body in a caustic material. O-ring (20-2227) can be removed with a pointed instrument before soaking in solvent. Install a new o-ring.
Page 2
In this part sheet, the words WARNING, CAUTION and NOTE are used to emphasize important safety information as follows: WARNING NOTE CAUTION Hazards or unsafe practices which Hazards or unsafe practices which could result in severe personal Important installation, operation or could result in minor personal injury, injury, death or substantial property maintenance information.
Page 3
Air Tools Regulator Air Pumping Control – For Air Systems and Fluid TROUBLESHOOTING MODELS 85-214 AND 85-215 AIR PRESSURE REGULATORS 1. Air leaks around bonnet a. Screws loose. a. Tighten screws. flange. b. Diaphragm pulled away from bonnet. b. Replace diaphragm.
Page 4
Carlisle Fluid Technologies is a global leader in innovative finishing technologies. Carlisle Fluid Technologies reserves the right to modify equipment specifications without prior notice. DeVilbiss , Ransburg , ms , BGK , and Binks ® ® ® ® ® are registered trademarks of Carlisle Fluid Technologies, Inc.