Download Print this page

Binks 84-320 Service Manual

Standard pressure diaphragm fluid regulators

SERVICE MANUAL

BINKS MODELS 84-320 (KEY OPERATED)

AND 84-407 (REMOTE CONTROL)

STANDARD PRESSURE DIAPHRAGM

FLUID REGULATORS

ALL STAINLESS STEEL FITTED

NOTE

Items marked with

are

to be pre-assembled

and tightened to

120 – 150 inch-pounds.

Tighten to

35 – 45 inch-pounds

Parts included in 6-1310 Repair Kit.

77-1486-R15.2 (11/2015)

1 / 4

Table of Contents

Need help?

Do you have a question about the 84-320 and is the answer not in the manual?

Page 1 SERVICE MANUAL BINKS MODELS 84-320 (KEY OPERATED) AND 84-407 (REMOTE CONTROL) STANDARD PRESSURE DIAPHRAGM FLUID REGULATORS ALL STAINLESS STEEL FITTED NOTE Items marked with to be pre-assembled and tightened to 120 – 150 inch-pounds. Tighten to 35 – 45 inch-pounds Parts included in 6-1310 Repair Kit.
Page 2 IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PROVIDE THIS INFORMATION TO THE OPERATOR OF THE EQUIPMENT. FOR FURTHER SAFETY INFORMATION REGARDING THIS EQUIPMENT, SEE THE GENERAL EQUIPMENT SAFETY BOOKLET (77-5300). Binks reserves the right to modify equipment specification without prior notice. 2 / 4...
Page 3 77-1486-R15.2 (11/2015) 3 / 4...
Page 4 WARRANTY POLICY Binks products are covered by Finishing Brands one year materials and workmanship limited warranty. The use of any parts or accessories, from a source other than Finishing Brands, will void all warranties. For specific warranty information please contact the closest Finishing Brands location listed below.

84-407