Skywalker SWGM100 User Manual
Hide thumbs
Also See for SWGM100:
- Assembly, maintenance & user manual (11 pages) ,
- Assembly, maintenance & user manual (36 pages)
Subscribe to Our Youtube Channel
Related Manuals for Skywalker SWGM100
Summary of Contents for Skywalker SWGM100
- Page 1 ASSEMBLY, MAINTENANCE, & USER MANUAL MODEL #SWGM100 WARNING Read all precautions and instructions in Skywalker Holdings LLC this manual before using this equipment. P.O. Box 574, Brigham City, UT 84302 Save this manual for future reference.
- Page 2 BEFORE YOU BEGIN Thanks for choosing Skywalker Trampolines! We’re just as excited as you are to help your family live an active (but most importantly FUN) lifestyle. This model is one of our favorites, and we’re confident you’ll love it too. To make things easier for you, we’ve listed important information that you (and your little outdoor adventurers) need to know.
-
Page 3: Part List
PART LIST Key No. Qty. Description Kick Back Net Side Net Elastic Cord Connected Elastic Cord PART IDENTIFICATION Before you begin, take a look at the drawings below to make sure you have all the parts! The numbers in the squares to the left (key numbers) will help you identify the parts during assembly. -
Page 4: Assembly
ASSEMBLY STEP 1 The kick back net accessory fits all different trampoline sizes! Use the picture below to locate the correct holes to attach the kick back net to your trampoline. The key at the bottom will tell you which holes to use! The numbers along the sides are there to help you count and find the exact hole that you need. - Page 5 STEP 2 When assembling, make sure the bullseye part of the net is centered on a leg piece (not between 2 legs). It might be best to assemble on the leg section furthest from the enclosure door. Wrap the PVC section of a side net (2) around the left leg of the trampoline leg section as shown.
- Page 6 ASSEMBLY STEP 4 Next, thread the same elastic cord back through the 8th hole on the kick back net as shown. Then, insert the elastic cord into the second grommet on the back of the PVC panel. 3rd hole 8th hole STEP 5 To secure in place, insert the free end of the elastic cord into the button and pull tight.
- Page 7 STEP 6 To secure the bottom of the side net, insert an elastic cord (3) into the bottom grommet on the back of the PVC panel. Then, insert the same elastic cord (3) into the 3rd hole from the bottom on the kick back net.
- Page 8 ASSEMBLY STEP 8 Next, thread the same elastic cord back through the 8th hole from the bottom of the kick back net as shown. Then, insert the elastic cord into the 3rd grommet on the back of the PVC panel. To secure in place, insert the free end of the elastic cord into the button and pull tight.
- Page 9 STEP 10 If you want, take a snack break because you’re MORE THAN HALFWAY DONE, and you deserve it. Now, tie the side nets to legs of your trampoline with the attached straps. If you have a 17’ x 15’ oval trampoline, the net should just reach the legs.
- Page 10 ASSEMBLY STEP 12 LAST STEP YOU’RE IN THE FINAL HOME STRETCH. Attach the kick back net (1) to the lower leg and upper frame of the trampoline by using the connected elastic cords (4). Simply wrap the cord through the net, around the frame, and secure by looping the elastic over the button.
-
Page 11: Limited Warranty
All warranty coverage extends only to the original retail purchaser from the date of purchase. Skywalker Holdings, LLC obligation under this warranty is limited to replacing or repairing, at Skywalker Holdings, LLC option, the product at one of this authorized service centers. All products for which a warranty claim is made must be received by Skywalker Holdings, LLC at one of its authorized locations.
Need help?
Do you have a question about the SWGM100 and is the answer not in the manual?
Questions and answers