Table of Contents
Advertisement
The Control Panel
E
C
A. Speed Dial
Turn the dial clockwise to choose from
manual speed settings from LOW to HIGH.
Once you select a speed, the blender will
run until you turn it back to OFF.
B. Programmed Settings
In order to activate the programmed
buttons, first turn the speed dial counter-
clockwise to the PROGRAMMED/PULSE
setting. Then select the programmed
button you would like to use. They have
been developed for optimal use when
blending those types foods.
• SMOOTHIE
• SOUP
• DIP/ SPREADS
Note: If you would like to stop the
blender in the middle of a programmed
cycle, simply press any button.
4
C. Pulse
Turn the speed dial counter-clockwise to
the PROGRAMMED/PULSE setting. Then
press the PULSE button for the desired
time.
D. LED Lights
The lights around the selected programmed
buttons will pulse when the unit is
operating in that mode.
E. Flashing Light
When speed dial is turned to the
PROGRAMMED/PULSE setting, the PULSE
button light will flash red to indicate the
unit is ready to operate.
CAUTION: Flashing light indicates ready
to operate. Do not touch the blade.
A
B
D
Advertisement
Table of Contents
