Omron VIVA Instruction Manual page 20

blinks
19
24-29 sets of measurements
results have been stored.
30 sets of measurements
results have been stored.
You pressed and held the
button more than 2 seconds.
You pressed the
You pressed and held the
button more than 2 seconds
when " " and the Bluetooth
symbol were blinking.
No batteries are inserted.
The batteries are inserted in
the wrong direction.
The batteries are worn out.
You didn't set the
measurement unit, date
and time after replacing the
batteries.
Your body weight is too low.
(Less than 12 kg.)
The registered data or body
composition values were out
of the measurable range.
Transfer the measurement results to
"OMRON connect" app, then the symbol
will disappear.
If the number exceeds 30, the oldest
results are deleted.Transfer the
measurement results to "OMRON
connect" app, then the symbol will
disappear.
This is displayed when you pair your
unit with your smart device. Follow the
instructions on the "OMRON connect"
app. Press the
longer) to stop the pairing.
This is displayed when the data is
transferred to your smart device.
Follow the instructions on the "OMRON
button.
connect" app. Press the
(2 seconds or longer) to stop the
transmission.
This is displayed when you delete the
communication setting. (Refer to Section
13.)
Press the
longer) to stop the operation.
Insert the batteries.
Insert the batteries in the correct
direction.
Replace all four batteries with new ones.
Set the measurement unit, date and
time. (Refer to Section 4.)
Select personal number before taking a
measurement.
Check whether the settings of birth date,
gender, and height are correct. Even if
these settings are correct, "
is displayed if they are out of the
displayable or supported age range.
button (2 seconds or
button
button (2 seconds or
"