Set The Measurement Unit, Date And Time - Omron VIVA Instruction Manual

Before using the unit
4.
time or after replacing the batteries.
Date and time can be set from "OMRON connect" app as well.
1.
"kg&cm" blinks on the display.
2.
Press the button to adjust and press the
The default measurement unit is "kg & cm".
You can set the measurement unit to "lb & inch" or "st-lb & inch".
3.
Press the button to adjust and press the
Time is 24-hour system.
During setting the year, date, hour and minute, hold down the
advance rapidly in increments of 10.
After all the settings for the measurement unit, year, month, day, hour and
minute are displayed in that sequence, the power automatically turns off.
NOTES
If any mistake is made during the setting, press the
power and start from "Step 1" again.
The power turns off if the unit is not used for 3 minutes. Set the measurement unit, date and time
anew.
To modify the measurement unit, date or time, remove the batteries and wait for at least 20 seconds.
Then insert the batteries and reset again.
7
button to
button to turn off the
Year
Month
Day