Parts Names - Mitsubishi Electric PZ-60DR-E Operating Instructions Manual

2

Parts Names

Display Section
For purposes of this
explanation, all parts of the
display are shown as lit.
During actual operation, only
the relevant items will be lit.
Identifies the current
operation
Shows the operating mode, etc.
* Multilanguage display is
supported.
"CENTRAL" indicator
Indicates that operation of the
remote controller has been
prohibited by a main controller.
"INTERLOCKED" indicator
Displayed when the Lossnay
starts off by interlocked Lossnay
unit or external signal.
"Timer Off" indicator
Indicates that the timer is off.
"Night Purge" indicator
Displayed during Night Purge
mode
Day-of-Week
Shows the current day of the week.
TIME/TIMER Display
Shows the current time, unless the simple timer is
set.
If the simple timer is set, shows the time remaining.
Ventilation-tilstande
Indicates the ventilation mode
status.
Heat exchange
By-pass
Automatic
(Heat ex./By-pass)
or
– 4 –
"ERROR CODE" indicator
Displayed together with the
malfunctioning unit (3 digits) and
an error code (4 digits).
"Locked" indicator
Indicates that remote controller
buttons have been locked.
"Clean The Filter and The
Lossnay Core" indicators
Comes on when it is time to clean
the filter and Lossnay core.
Timer indicators
The indicator comes on if the
corresponding timer is set.
"Automatic Fan Speed" indicator
Displayed during automatic fan
speed operation
"Fan Speed Adjustment" indicator
Used to select the fan of either Extra
Low, Low, High, Extra High.
Extra Low Low High Extra High
(Power On indicator)
Indicates that the power is on.