Servicing - Mitsubishi Electric PZ-60DR-E Operating Instructions Manual

6

Servicing

<Flashing Error Codes>
Basic System
ERROR CODE
Unit No.
The contact telephone number will be displayed if CALL has been set. Pressing the CLEAR button
once will display the contact telephone number even when an error code is not displayed. See the
Installation Manual for the setup method.
If the Operation lamp and error code are both flashing: This means that the Lossnay unit is out of order and operation has been stopped (and cannot resume). Take note of
the indicated unit number and error code, then switch off the power to the Lossnay unit and call your dealer or servicer.
Operation lamp
(Flashing)
Alternating Display
– 17 –
M-NET System
ERROR CODE
Unit No.
Alternating Display
Operation lamp
(Flashing)
Unit address No.