Mitsubishi Electric PZ-60DR-E Operating Instructions Manual page 5

Operation Section
Operation lamp
On during operation. Flashes
when a malfunction occurs.
Function selector
button
Used to select the ventilation
mode from among Heat exchange.
By-pass or automatic.
MENU button
(MONITOR/SET button)
BACK button
CLOCK button
Back
Ahead
ON/OFF button
(DAY button)
Opening the
door.
Note:
If you press a button for a feature that is not installed at the Lossnay unit, the remote controller will display the "NOT
AVAILABLE" message.
If you are using the remote controller to drive multiple Lossnay units, this message will appear only if the feature is not
present at the main unit.
OPERATION button
To preceding operation number.
– 5 –
ON/OFF button
Switches between "run" and "stop".
Switches between "Operation" and "24-
hour Ventilation (Extra Low fan speed)"
when 24-hour Ventilation is set.
Fan Speed Adjustment button
Used to select the fan of either Low or
High (Extra High).
button
(<ENTER> button)
FILTER button
Press two times to reset the filter
sign display.
CLEAR button
"Extra Low" fan speed
button (OPERATION button)
Selects Extra low fan speed operation
To next operation number.