Mitsubishi Electric PZ-60DR-E Operating Instructions Manual page 10

2 3
Day Setting
4 Operation No.
<How to Set the Weekly Timer>
1. Be sure that you are at a standard control screen, and that the weekly timer
indicator 1 is shown in the display.
MENU] button b, so that the "TIMER SET" appears on the screen
2. Press the [
(at 2). (Note that each press of the button toggles the display between "TIMER
SET" and "TIMER MONITOR".)
ON/OFF (DAY)] button 9 to set the day. Each press advances the
3. Press the [
display at 3 to the next setting, in the following sequence: "SUN MON TUE WED
THU FRI SAT" → "SUN" → ... → "FRI" → "SAT" → "SUN MON TUE WED THU
FRI SAT"...
OPERATION buttons (7 or 8) as necessary to select the
4. Press the or
appropriate operation number (1 to 8) 4.
1
* Your inputs at Steps 3 and 4 will select one of the cells from the matrix
illustrated below.
(The remote controller display at left shows how the display would appear when
setting Operation 1 for Sunday to the values indicated below.)
Setup Matrix
Op No. Sunday
• 9:00
No. 1 • ON
• High
• 10:00
No. 2
• OFF
...
No. 8
Note:
By setting the day to "Sun Mon Tue Wed Thu Fri Sat", you can set the same
operation to be carried out at the same time every day.
(Example: Operation 2 above, which is the same for all days of the week.)
– 10 –
...
Monday Saturday
• 10:00 • 10:00 • 10:00
• OFF • OFF • OFF
<Operation 1 settings
for Sunday>
Start the Lossnay
unit at 9:00, with fan
speed set to High.
<Operation 2 settings
for every day>
Turn off the Lossnay
unit at 10:00.