Mitsubishi Electric PZ-60DR-E Operating Instructions Manual page 11

<How to set the Weekly Timer>
Shows the time setting 5
CLOCK] button a as necessary to set the desired time (at 5).
5. Press the appropriate [
* As you hold the button down, the time first increments in minute intervals, then in
10-minute intervals, and then in 1-hour intervals.
ON/OFF] button 1 to select the desired operation (ON or OFF), at 6.
6. Press the [
* Each press changes the next setting, in the following sequence: No display (no setting)
→ "ON" → "OFF"
Note:
The timer will not function when not displayed.
7. Press the Fan Speed Adjustment button 3 to set the fan speed (at 7).
* Each press changes the setting, in the following sequence: No display (no setting)
→ Extra High → High → Low → Extra Low → No display.
Note:
When not displayed, the system will operate at the currently set fan speed (other than Extra
Low)
For the Lossnay models without extra low fan speed, the speed will not be displayed.
8. To clear the currently set values for the selected operation, press and quickly release the
CLEAR button 0 once.
* The displayed time setting will change to "—:—", and the On/Off and fan speed settings
will all disappear. (To clear all weekly timer settings at once, hold down the CLEAR
button 0 for two seconds or more. The display will begin flashing, indicating that all
settings have been cleared.)
9. After making the appropriate settings at Steps 5, 6, 7. and 8, press the
lock in the values.
* "TIMER SET" indicator flashes three times.
Note:
Your new entries will be cancelled if you press the BACK button 2 before pressing the
button 4. If you have set two or more different operations for exactly the same time, only
the operation with the highest Operation No. will be carried out.
10. Repeat Steps 3 to 9 as necessary to fill as many of the available cells as you wish.
11. Press the BACK button 2 to return to the standard control screen and complete the
setting procedure.
12. To activate the timer, press the [
disappears from the screen. Be sure that the "Timer Off" (at 0) indication is no
longer displayed.
* If there are no timer settings, the "Timer Off" (at 0) indication will flash on the screen.
6
Shows the selected operation (ON or OFF)
* Does not appear if operation is not set.
7
Shows the fan speed setting
ON/OFF] button 9, so that the "Timer Off" indication
<How to View the Weekly Timer Settings>
1. Be sure that the weekly timer indicator is visible on the screen (at 1).
2. Press the [
on the screen (at 8).
3. Press the [
you wish to view (at 3).
4. Press the or
change the timer operation shown on the display (at 9).
* Each press will advance to the next timer operation, in order of time
setting.
5. To close the monitor and return to the standard control screen, press the
BACK button 2.
<To Turn Off the Weekly Timer>
ON/OFF] button 9 so that "Timer Off" indication appears at 0.
Press the [
10
button 4 to
<To Turn On the Weekly Timer>
ON/OFF] button 9 so that the "Timer Off" indication (at 0)
Press the [
goes dark.
10
– 11 –
8 9
Timer Settings
1
MENU] button b so that "TIMER MONITOR" is indicated
ON/OFF (DAY)] button 9 as necessary to select the day
OPERATION buttons (7 or 8) as necessary to