Press the retarder (sheet separator) release button. This will release the pressure against the Feed
Wheel and allow the technician to turn the Feed Wheel in the direction of paper feed. While the but-
ton is depressed, the Feed Wheel should turn freely.
Retarder pressure release button. When you press
this button and turn the Feed Wheel, it should turn
If the retarder adjustment is incorrect, insert
freely. When you release this button, you should
the provided 9/64" hex wrench into the adjust-
feel the rubbing of the retarder against the Feed
ment hole. Turn the wrench clockwise to
Wheel. This should be a slight drag.
loosen, counterclockwise to tighten.
(7)