Advertisement
If you put one finger on each side of the retarder, you should
adjust the retarder pressure so the retarder just stops rock-
ing. If the retarder is loose, it will rock slightly. You want an
even pressure against the Feed Wheel.
17) Once satisfied with retarder setting, return unit to service. Please note on any paperwork asso-
ciated with folder that the replacement feed wheel after the clutch is updated is M-Y part #W-
O2051369. See the parts list at the beginning of document for the M-Y numbers associated with the
other parts replaced.
1812 with Disk Clutch Wiring Diagram
251 Wedcor Drive • Wabash, IN 46992
Phone (260)-563-0641 • Fax (260) 563-4575
Website: www.martinyale.com • Email: info@martinyale.com
M-S027951
REV. 0
(8)
6/16/15
Advertisement
