Restarting The Converter - eKey home series Operating Instructions Manual

Step Instruction
5th After a few seconds, the updated ekey home converter LAN RS-485 appears in the device
list on the left.
The converter has been updated.

10 Restarting the converter

A restart is initiated via the converter. The configured settings of the converter remain unaffected.
Step Figure
1st
The converter has been restarted.
Description
Press and hold the button with the operating rod
for at least 0.3 seconds.
Display
Status LED
flashes red.
The lower
status LED
flashes red
briefly.
en│24