Interlogix TruVision TVB2406 Installation Manual page 8

Note:
When making adjustments to the VF lens bullet
camera, it is important to tighten the access cover
for the area that contains the video test cable
connector, OSD menu button, and the 960H
analog/WDR/TVI selection switch. The access
cover should be rotated until it is tight up against the
camera body.
Please check the camera output settings before
setting up a system. The TVI video output can only
be connected to a DVR with a TVI signal input. The
960H analog output supports the standard monitor
(or test monitor), an encoder, or a DVR.
The built-in switch is used to enable/disable the
WDR feature. When WDR feature is enabled, the
CVBS/960H analog output will be blocked out.
6