Alarm Temperature Setting - Sanyo MPR-1411 Instruction Manual

ALARM TEMPERATURE SETTING

This unit is provided with both high and low temperature alarms. The temperature at which the alarm is
activated may be changed.
The available set range for high temperature alarm is between +2
low temperature alarm against the chamber temperature.
Note: The temperature alarm is set at
Display
F01
F02
As an example, Table 2 shows the procedure to set the high temperature alarm so that the alarm can
activate when the chamber temperature is 3
Table 3 shows the procedure to set the low temperature alarm so that the alarm can activate when the
chamber temperature is 3
Table 2 Procedure for setting high temperature alarm
Description of operation
1
Press numerical value shift key for
2
5 seconds.
Press numerical value shift key and
3
scroll the figure to 6.
4 Press set key.
Set the temperature to 03 with the
5 digit shift key and numerical value
shift key.
6 Press set key.
Table 3 Procedure for setting low temperature alarm
Description of operation
1
Press numerical value shift key for
2
5 seconds.
Press numerical value shift key and
3
scroll the figure to 7.
4 Press set key.
Set the temperature to -03 with the
5 digit shift key and numerical value
shift key.
6 Press set key.
17
o
5 C of the set temperature at the factory.
Mode
High temperature alarm set
Low temperature alarm set
o
C higher than the set temperature.
o
C lower than the set temperature.
Key operated
Key operated
o
C and +14
Function
See Table 2 on page 17
See Table 3 on page 17
Indication after operation
---- The current chamber temperature is
displayed.
The first digit is flashed.
When pressed, the figure of settable
digit increases.
SET The first digit is flashed.
Pressing the key shifts the digit which
can be set.
When pressed, the figure of settable
digit increases.
Alarm temperature is memorized and
SET the current chamber temperature is
displayed.
Indication after operation
---- The current chamber temperature is
displayed.
The first digit is flashed.
When pressed, the figure of settable
digit increases.
SET The first digit is flashed.
Pressing the key shifts the digit which
can be set.
When pressed, the figure of settable
digit increases.
Alarm temperature is memorized and
SET the current chamber temperature is
displayed.
- 55 -
o o o
C and -2 C and -14 C for