Download Print this page

OLT 6x6 Maximizer Assembly Manual page 8

Storage shed
Hide thumbs Also See for 6x6 Maximizer:

Advertisement

Plywood Floor shown in Floor
Section B illustrations may not
be exactly as shipped.
Door Header
15.
The wall panel will sit flush at the end of the
plywood floor with the side wall panels sandwiched
between them.
Note: Siding will overhang the floor by approx. 1/2"
1-888-658-1658
Door Jamb
Wall Siding
www.outdoorlivingtoday.com
Page 8
13.
panels and become familiar
with their location.
Make sure to position panels
right side up so water is
directed away from and not
into shed.
Note, to determine correct
alignment, the attached
Bottom Wall Plate of wall
panel will be sitting on floor.
14.
Starting at Rear Corner, position a Wall
Panel on top of plywood floor. The Wall Panel
bottom framing will sit flush with Floor Framing.
Wall siding will overhang the floor.
Outside 2x3 framing of wall panel
will sit even with outside of floor
framing with plywood flooring
slightly inset.
sales@outdoorlivingtoday.com
Lay out all the wall
Rear Wall Panel

Advertisement

loading