Advertisement
26.
Complete remaining Side and Rear Top Plate
attachments as per Steps 24-25.
screws into perimeter
Confirm 64" Wide between Door Jambs
1-888-658-1658
Angle
Floor Joists.
Bottom Wall
Framing
www.outdoorlivingtoday.com
27.
When all Walls and Top Plates are attached
together, check wall and floor alignment. Bottom
wall framing should sit flush with outside of floor
joists. See Steps 15-20 for correct alignment.
Confirm Door Jambs are 64" apart at top and
bottom of door opening.
When positioned correctly, fasten bottom wall
plates to floor using 4 - 2 1/2" screws per wall
panel.
Optional - Caulking
seams will help prevent
moisture from entering at
seam.
Caulking not included in
kit.
Page 13
sales@outdoorlivingtoday.com
Advertisement
