Advertisement
52.
Attach Narrow Trims (Rear Walls) to in each rear corner and middle wall seam
(3 - 1/2" x 2 1/2" x 79"). Use 8 - 1 1/2" finishing nails per piece. Align Trims tight underneath Soffit
and Rafter and so it caps the Side Rear Wide Trim.
Side Front Wide Trim
54.
Attach Horizontal Gable Trim ( 4- 1/2" x 4 1/2" x 37 7/8") to both sides of shed. (2 per side). Position
over gable and wall seam. Use 4 - 1 1/2" nails to secure each piece. Make sure gable trims covers
flashing completely. Align even with outside of wide trim leaving a slight gap a center. Attach Horizontal
Detail Plates over Gable Trim seam and secure with 4 - 1 1/2" nails. Complete both sides.
1-888-658-1658
Side Rear
Wide Trim
53.
Position and attach Side
Front Wide Trims and Narrow
Trims (Sides). Use 8 - 1 1/2"
nails per piece to secure.
www.outdoorlivingtoday.com
Page 23
Align trim tight
underneath
Soffit and
Rafter.
Cover wall seam
sales@outdoorlivingtoday.com
Narrow
Trim
Detail Plate
Advertisement
