Advertisement
Hor. Door Stop with Dado cut.
63.
Position Horizontal Door Stop with dado
facing out, tight against Door Header. Align so
Dado cut is flush with Header leaving
approximately a 1" overhang in the doorway.
Attach with 6 - 2" screws.
Threshold
Door Flange
1-888-658-1658
Inside Edge of
Door Frame
Door Stop
www.outdoorlivingtoday.com
Page 27
64.
Close both doors and align so
doors are straight. Attach Door
Threshold (2 1/2" wide x 62 1/2" long)
with 4 - 2" screws centering between
doorway.
65.
Position and attach Door
Flange and both Door Stops to
door framing.
Starting with the Door Flange
Position and attach on inside
door frame (left door from
outside) using 6 - 2" screws.
Position on inside edge of door
frame so Flange overlaps door
frame by 1".
Position Door Stops in each
corner screwing into door
framing. Before attaching stop
to door, check positioning to
confirm Door Stop does not
bind and adjust accordingly.
Attach with 4 - 2" screws.
sales@outdoorlivingtoday.com
Advertisement
