Advertisement
55.
Attach Facia Nailing Strips (4 - 3/4" x 1 1/2" x 42") to underside edge of plywood roof with
4 - 1 1/4" screws per piece. Do this on both sides of the shed.
Locate Side Facia (angle cut on both ends). There are 2 left and 2 right side pieces. Correct posi-
tioning is rough side out. Starting on one side, line facia up so the end is even with edge of
plywood roof. Attach to nailing strip with 8 - 1 1/2" nails. Align 2nd Side Facia piece up with
plywood edge. Note that there will be a slight gap where facias meet at the peak. This will be
covered up with the Pentagon Facia Plate in Step in Step 57. Attach with 8 1 1/2" nails.
56.
Position and attach Front Facia to ends of Roof Rafters with 10 - 1 1/2" nails. Front Facia will
cap side facia in corners and line up on top edge with plywood roof.
1-888-658-1658
Slight gap
www.outdoorlivingtoday.com
Page 24
sales@outdoorlivingtoday.com
Advertisement
