Safety Decals - McConnel MAGNUM MULCHA 225 Operator's Manual

Transportation Safety
▲ In transport, reduce speed, especially on bumpy roads, the weight of the machine may
render driving difficult and damage the machine itself.
▲ Ensure the levers that operate the hydraulic lift are locked, to avoid the lowering of the
machine during transport.
▲ When driving on public roads, respect all road rules in force.
▲ Never transport the machine with the rotor running, even for short distances.
Operating Safety
▲ Pay special attention when working with the machine not to touch fixed objects such as
drains, walls, shafts, kerbs, guard rails, tracks etc. This could cause the breakage of
the components, which could be thrown out of the machine at very high speed.
▲ If wires, ropes or chains should become entangled in the rotor stop immediately to
prevent damage or dangerous situations; stop the rotor and the tractor, take out the
starting key. Put working gloves on; clear the rotor with the aid of pliers or shears. Do
not try to disentangle by inverting the rotational direction of the rotor.
▲ Do not use the machine when excessive vibration is experienced, as this may cause
breakage and serious damage - find the cause of the vibration and eliminate it before
using the machine again.
Although the information given here covers a wide range of safety subjects, it is impossible to
predict every eventuality that can occur under differing circumstances whilst operating this machine.
No advice given here can replace 'good common sense' and 'total awareness' at all times, but will go
a long way towards the safe use of your McConnel machine.

SAFETY DECALS

1. 2.
1. Danger; do not work under a raised or unsupported machine.
2. Danger zone, keep clear; risk from crushing.
3. Keep clear of working machine; risk from projection of objects.
4. Keep a safe distance from the machine at all times; risk from raised machine.
5. Always switch machine off, remove starting key and read instruction manual before
performing service or maintenance work on the machine.
6. Risk of hand or feet injuries; always ensure all machine safety guards are in place
when the machine is running.
7. Keep a safe distance from the machine at all times; risk of entanglement.
8. Ensure nuts and bolts are kept tight.
9. Read the manual first before attempting to operate or service the machine.
3. 4. 5. 6.
5
7. 8. 9.