Detachment And Storage - McConnel MAGNUM MULCHA 225 Operator's Manual

Reversing & Turning
When reversing or turning the unit the machine should be stopped and lifted clear of the
ground to protect components.
Hydraulic Flap
The machine features a hydraulically operated flap which can be opened as required for
working with denser materials. Extra care should be adopted when the flap in the open
position as projectiles from the working machine will be ejected to a greater distance.
Stopping the Machine
When stopping the machine, forward travel should be halted before disengaging the PTO;
leave the machine on the ground until the rotor has stopped turning completely before
attempting to raise the machine.
Machine Parking
When parking the machine it should placed at rest on the ground on a level firm site.
Always remove and pocket the tractors starting key when leaving the unit unattended.
DETACHMENT & STORAGE
Detaching the machine from the tractor
Removal of the machine should be performed on a firm level site.
The procedure for detachment is as follows:
 Gently lower the machine fully to the ground.
 Switch off the tractor and remove its starting key.
 Detach hydraulic hoses from the tractor service and stow them neatly on the machine.
 Remove the PTO driveshaft.
 Remove the top link and both pins from the lower attachment points.
 Carefully and slowly drive the tractor clear of the machine.
 Clean and lubricate the machine in preparation for next use.
 Ensure the machine is left in a safe stable condition.
Storage
For extended periods of storage it is advisable that the machine be kept in a clean dry
environment protected from the elements to avoid risk of corrosion. The machine should
be thoroughly cleaned and lubricated prior to storage. At this point it is good practice to
check the machine for worn or damaged components - any parts that require replacing
should be ordered and fitted at the earliest opportunity so the machine is fully prepared for
the next seasons work.
9