Using Ieee802.1X - Oki C813n User Manual

*1) To specify a host name, edit the host's
file or access via the DNS server.
*2) TWith Telnet, when only IPv6 is enabled
you cannot specify a host name by the
DNS server.
*3) You cannot specify a host name when
you use a link local address to access.
*4) Enter an IPv6 address enclosed with
square brackets.
Note
● To use IPv6 on Windows XP, install IPv6.
Checking IPv6 Address
The IPv6 address is automatically assigned.
1
Select [View Info].
2
Select [Network] > [TCP/IP].
Memo
● When the global address is displayed only as zeros, it may
be an error due to the router being used.
Reference
● You can also check the IPv6 address in the network report
from the printer by pressing the
selecting [Print Information] > [Network]. For details
on the report and how to print it, refer to
Print Information" P.58.
or button and then
"Printing Out
- 101 -
Changing Network Settings From the Web Page

Using IEEE802.1X

Your printer supports IEEE802.1X authentication.
Be sure to configure the printer and your
computer before performing the following steps.
Reference
● For details on the initial setup and the IP address, refer to
the User's Manual (Setup).
Configuring Your Printer for
IEEE802.1X
„ Using PEAP
1
Access the printer's web page and log in
as the administrator.
2 Select [Admin Setup].
3 Select [Network] > [IEEE802.1X].
4
Select [Authenticate Server] and then
click [Import].
5
Enter the file name of the CA certificate
and then click [OK].
Specify a certificate issued by the certificate
authority from which the RADIUS server obtained
a certificate. A PEM, DER, and PKCS#7 file can be
imported.
6 Click [Return to Previous Page].
7
Select [Enable] for [IEEE802.1X].
8 Select [PEAP] for [EAP Type].
9 Enter a user name in [EAP User].
10
Enter a password in [EAP Password].
11
Click [Submit].
The network card reboots to enable the new
settings.
12
When the standby screen appears on the
printer, turn off the printer.
13 Go to "Connecting Your Printer to an
Authentication Switch"
5
P.102.