Oki C813n User Manual page 71

Item
IBM PPR Form Length
Setup
TOF Position
Left Margin
Fit to Letter
Text Height
Continuous Paper Mode
EPSON FX Character Pitch
Setup
Character Set
Symbol Set
Letter O Style
Zero Character
Line Pitch
White Page Skip
CR Function
Line Length
Form Length
TOF Position
Left Margin
Fit to Letter
Text Height
Continuous Paper Mode
Private Print Verify job option
Setup
(When SD
Memory card
is installed)
Erase job option
Keep job for
Job Limitation
Verify job password
Job Auto Search
Factory Default
11 inch Specifies the length of paper.
or
11.7 inch
0.0 inch Sets the position from the top edge of paper.
0.0 inch Sets the amount to shift the horizontal print
start position to the right.
Enable Sets the printing mode that can fit print data,
or equivalent to 11 inches (66 lines), in the
Disable LETTER-size printable area.
Same Sets height of a character.
Off Sets to Landscape the edit direction of paper
supported by A3 printer.
10 CPI Specifies character pitch.
SET-2 Specifies a character set.
IBM-437 Specifies a symbol set.
Disable Specifies the style that replaces φ(9B) and
¥ (9D) with φ (ou) and Φ (zero).
Normal Specifies the style of O (zero).
6 LPI Sets line spacing
Off Sets whether ejecting a blank sheet or not.
Available only when simplex is set.
CR Sets performance when CR code is received.
80 column Specifies the number of characters per line.
11 inch Specifies the length of paper.
or
11.7 inch
0.0 inch Sets the position from the top edge of paper.
0.0 inch Sets the amount of shifting the horizontal print
start position to the right.
Enable Sets the printing mode that can fit print data,
or equivalent to 11 inches (66 lines), in the Letter-
Disable size printable area.
Same Sets height of a character.
Off Sets to Landscape the edit direction of paper
supported by A3 printer.
Disable Sets whether to verify a job before printing.
If enabled, the machine verifies that the job is
not altered before starting printing. The security
is enhanced, however it will take longer to start
printing.
No overwrite Sets how to delete a job.
You can overwrite deleted data so that it will not
be restored.
If enabled, it will take longer to delete.
2 hours Sets the storage period of jobs.
If the set period elapses after jobs are stored,
the jobs will be automatically deleted.
Disable Sets whether to save a restricted print job.
If [Private Print Only] is selected, print jobs
other than private print are not accepted.
Off Sets whether to verify a job password when the
access control is enabled.
On Sets whether to search a job at the same time
as unlocking the panel lock when the access
control is enabled.
- 71 -
Changing the Equipment Settings
Description
3