Oki C813n User Manual page 98

Changing Network Settings From the Web Page
Configuring Your Computer
Memo
● Be sure to configure the printer before configuring your
computer.
1
Click [Start] and select [Control Panel] >
[Administrative Tools].
2 Double-click [Local Security Policy].
3 On the [Local Security Policy] window,
click [IP Security Policies on Local
Computer].
4
From the [Action] menu, select [Create
IP Security Policy].
5 On the [IP Security Policy Wizard],
click [Next].
5
6
Enter a [Name] and a [Description]
and then click [Next].
7 Deselect the [Activate the default
response rule (earlier versions of
Windows only)] check box and then
click [Next].
8
Select [Edit Properties] and then click
[Finish].
9
On the IP security policy properties
window, select the [General] tab.
10 Click [Settings].
11
On the [Key Exchange Settings]
window, enter a value (minutes) for
[Authenticate and generate a new
key after every].
Note
● Specify the same value as [Lifetime] specified in the
configuration for "Phase1 Proposal" in
Your Printer" P.97. Although [Lifetime] is specified
in seconds, enter a value in minutes for this step.
12
Click [Methods].
13 On the [Key Exchange Security
Methods] window, click [Add].
14 Specify [Integrity algorithm],
[Encryption algorithm] and
[Diffie-Hellman group].
Note
● Select the same value that was specified
in [IKE Encryption Algorithm],
[IKE Hush Algorithm], and
15
Click [OK].
16 On the [Key Exchange Security
Methods] window, click [OK].
17 On the [Key Exchange Settings]
window, click [OK].
18
On the IP security policy properties
window, select the [Rules] tab.
19
Click [Add].
20 On the [Security Rule Wizard], click
[Next].
21
On the [Tunnel Endpoint] screen,
select [This rule does not specify a
tunnel] and then click [Next].
22 On the [Network Type] screen, select
[All Network Connections] and then
click [Next].
23 On the [IP Filter List] screen, click
[Add].
24
On the [IP Filter List] window, click
[Add].
25 On the [IP Filter Wizard], click [Next].
26 On the [IP Filter Description and
Mirrored Property] screen, click
[Next].
27
On the [IP Traffic Source] screen, click
[Next].
28 On the [IP Traffic Destination] screen,
"Configuring
click [Next].
29 On the [IP Protocol Type] screen, click
[Next].
30 Click [Finish].
31 On the [IP Filter List] window, click
[OK].
32 On the [Security Rule Wizard], select
the new IP filter from the list and then
click [Next].
- 98 -
[Diffie-Hellman group] at the time of configuration
for "Phase1 Proposal" in "Configuring Your Printer"
P.97.