Oki C813n User Manual page 88

Windows Utilities
Forwarding Jobs Automatically
If you cannot print because the selected printer
is busy, offline or out of paper, you can configure
the settings to forward the print jobs to another
OKI printer automatically.
Note
● Print jobs can only be forwarded to the same OKI model
printer as the one you are using.
● Before forwarding a job, you need to add another same
OKI printer.
● This requires administrator rights.
1 Launch the OKI LPR utility.
4
2
Select the printer you would like to set.
3 Select [Confirm Connections] from
[Remote Print] menu.
4 Click [Advanced].
5
Select the [Automatic Job Redirect
Used] checkbox.
6
To forward jobs only when errors occur,
select the [Redirect only at the time
of an error] checkbox.
7 Click [Add].
8
Enter the IP address of the printer to
forward to, and click [OK].
9
Click [OK].
Printing with Multiple Printers
You can print with multiple printers with a single
command.
Note
● This function sends remote print jobs to multiple printers
and prints simultaneously.
● Administrator privileges are required.
1 Launch the OKI LPR utility.
2
Select the printer you would like to
configure.
3 Select printer [Confirm Connections]
from [Remote Print] menu.
4 Click [Details].
5
Select the [Print to more than one
printer at a time] checkbox.
6
Click [Options].
7 Click [Add].
8
Enter the IP address of the printer for
simultaneously printing and click [OK].
9
Click [OK].
Opening a Webpage
You can open the printer web page from the OKI
LPR utility.
1
Launch the OKI LPR utility.
2 Select a printer.
3
Select [Web Setting] from the
[Remote Print] menu.
Memo
● You cannot open the web page when the web port
number has been changed. Carry out the following
procedure, and reconfigure the OKI LPR utility port
number.
a
Select a printer.
b Select [Confirm Connections] from
[Remote Print].
c
Click [Advanced].
d Enter the port number into [Port
Numbers].
e Click [OK].
Adding Comments to Printers
You can add comments to the printers added
into the OKI LPR utility in order to identify them.
1 Launch the OKI LPR utility.
2
Select a printer.
3 Select [Confirm Connections] from
[Remote Print].
4 Enter a comment and click [OK].
5 Select [Show comments] from the
[Option] menu.
- 88 -