Marking Laps By Distance - Garmin EDGE 800 Owner's Manual

• Select Start And Lap to
trigger the lap counter at the
GPS location where you press
START and at any location
during the ride where you press
LAP.
Select Mark And Lap to trigger
•
the lap counter at a specific GPS
location marked before the ride
and at any location during the
ride where you press LAP.
5. If necessary, customize the lap data
fields (page 39).

Marking Laps by Distance

You can use Auto Lap to automatically
mark the lap at a specific distance. This
feature is helpful for comparing your
performance over different parts of a
ride (for example, every 10 miles or 40
kilometers).
1. Select MENU >
Settings > Auto Lap > Auto Lap
Trigger.
Edge 800 Owner's Manual
> Bike
2. Select By Distance.
3. Select Lap At.
4. Enter a value.
5. If necessary, customize the lap data
fields (page 39).
Using Auto Pause
You can use Auto Pause
timer automatically when you stop
moving or when your speed drops
below a specified value. This feature is
helpful if your ride includes stop lights
or other places where you need to slow
down or stop.
NOTE: The paused time is not saved
with your history data.
1. Select MENU >
Settings > Auto Pause > Auto
Pause Mode.
2. Select an option:
Settings
to pause the
®
> Bike