Putting On The Heart Rate; Monitor - Garmin EDGE 800 Owner's Manual

ANT+ Sensors

Putting on the Heart Rate

Monitor

Wear the heart rate monitor directly on
your skin, just below your breastplate.
It should be snug enough to stay in
place during your ride.
1. Connect the heart rate monitor
module to the strap.
➊
2. Wet both electrodes
back of the strap
connection between your chest and
the transmitter.
3. Wrap the strap around your chest,
and connect it.
8
➊
on the
➋
to create a strong
➋
The Garmin logo should be right-
side up.
4. Bring the device within range (3 m)
of the heart rate monitor.
TIP: If the heart rate data is erratic
or does not appear, you may have to
tighten the strap on your chest or warm
up for 5–10 minutes.
After you put on the heart rate monitor,
it is on standby and ready to send data.
Paring the Heart Rate
Monitor
If you purchaced a heart rate monitor
separately, you must pair it with the
Edge in order to view your heart rate
data.
1. Turn on the Edge.
2. Bring the Edge within range (3 m)
of the heart rate monitor.
Edge 800 Owner's Manual