Troubleshooting - Garmin EDGE 800 Owner's Manual

Appendix

Troubleshooting

Problem
The buttons do not
respond. How do I
reset the Edge?
I want to clear all the
user data from my
Edge.
My Edge does not
acquire satellite
signals.
The battery gauge
does not seem
accurate.
The battery does not
last long.
How do I know my
Edge is in USB mass
storage mode?
8
Solution
Press and hold POwER, MENU, and RESET simultaneously
to reset the Edge.
NOTE: This does not erase any of your data or settings.
1. Turn off the Edge.
2. Press and hold POwER and RESET until the message
appears.
3. Select Yes to clear all user data.
NOTE: This deletes all user-entered information, but it does not
delete your history.
1. Take your Edge out of parking garages and away from tall
buildings and trees.
2. Turn on the Edge.
3. Remain stationary for several minutes.
Allow the Edge battery to fully discharge, and then fully charge
the battery (without interrupting the charge cycle).
Reduce the backlight time
You should see a new removable disk drive in My Computer
on Windows computers and a mounted volume on Mac
computers.
(page 49).
Edge 800 Owner's Manual