Calibrating Your Power Meter - Garmin EDGE 800 Owner's Manual

to www.garmin.com/intosports.
Pairing Your Power Meter
Refer to the manufacturer's
instructions.
When the power meter is paired,
a message appears, and the
power icon appears solid on the
status page.
Calibrating Your Power Meter
For calibration instructions specific
to your power meter, refer to the
manufacturer's instructions.
Before you can calibrate your power
meter, it must be properly installed and
actively recording data.
1. Select MENU >
Settings > Bike Profiiles.
2. Select a bike profile.
3. Selec ANT+ Power > Calibrate.
4. Keep your power meter active by
pedaling until a message appears.
Edge 800 Owner's Manual
> Bike
Viewing Your Power Zones
You can set seven custom power zones
using Garmin Connect or Garmin
Training Center. If you know your
FTP (functional threshold power)
value, you can enter it and allow the
software to calculate your power zones
automatically.
1. Press and hold MENU.
2. Select Settings > Bike Settings >
[Bike 1] > Power Zones.
Non-Zero Averaging for Power
Data
The non-zero data-averaging setting
is available if you are training with
an optional power meter. The default
setting is to exclude zero values that
occur when you are not pedaling.
To turn the non-zero averaging on
or off, select MENU >
Settings > Data Averaging > Power.
ANT+ Sensors
> Bike