Basic Safety Recommendation; Introduction - Badger Meter ModMAG M2000 User Manual

Basic safety recommendation / Introduction
1.

Basic safety recommendation

Please see "Basic safety recommendations" in installation and operation manual
ModMAG ® M2000.
2.

Introduction

The ModMAG
interface to the Badger ModMAG
• M-Bus primary and secondary address selection
• The primary address is saved in a non-volatile memory
• 300, 2400 and 9600 baud communication speed
• Automatic baud rate detection or manually programmable baud rate
• Standard M-Bus serial communication parameters: 8 data bits, 1 parity even bit,
1 stop bit.
• LED for M-Bus communication green: Incoming M-Bus transmission
Red: Outgoing M-Bus transmission
• Five different M-Bus response telegrams with different meter values (according to
EN13757-3, chapter 4.22, table 2):
− All
− Instantaneous values
− Testing
− Calibration
− Manufacturing
• Meter data update from ModMAG
• M-Bus wrapper command for ModBus
® M2000 M-Bus module is providing a EN13757 compatible M-Bus
M2000 flow meter with the following features:
®
MID_M2000_BA_MB_02_1805
® M2000 every second
® communication
Page 3/14