Setting Master Valve Operation - Hunter NODE-100 Owners Manual And Programming Instructions

ADVANCED PROGRAMMING FEATURES (CONTINUED)
NOTE: Be careful when using Easy Retrieve
memory. Saving program data to memory using
Easy Retrieve will take the current program
information and override whatever is saved in
permanent memory. When saving program data,
make sure that the current program data is what
you want saved.

Setting Master Valve Operation

(NODE-200, NODE-400, & NODE-600 Only)
The multi-station NODE models (NODE-200, NODE-400, and
NODE-600) can be programmed with the use of a normally closed
master valve . When programming with the master valve you will be
assigning Station 1 as the master valve, effectively losing the use of
Station 1 for activation of an irrigation station .
1 . From the idle mode, press the
is displayed.
2 . Program A will be displayed along with the active station number
on the lower left. Make sure the active station showing is "1." The
run time will be shown.
13
button until the icon
3 . Press the button once and the MV icon will display on the
screen and the time will disappear. Station 1 is now acting as
the master valve and will not be available in other programming
screens.
4 . When the master valve is activated, it will apply to all programs
and the MV icon will stay displayed on the screen at all times.
Programmable Off (Up to 99 Days)
This feature permits the user to stop all programmed watering for the
designated period from 1-99 days . At the end of the programmable off
period, the controller will resume normal operation .
1 . From idle mode, press the
displayed. Wait two seconds until OFF is shown on the display.
The controller is now in System Off mode.
2 . Press the button and a blinking "1" will be displayed, indicating
the number of days the controller will stay off. Program the off
days as desired, up to 99 days maximum.
3 . The display will show the number of days remaining in the
OFF period.
4 . To interrupt the OFF period, press the
idle mode screen, showing the time of day and day of the week.
button until the icon is
button to return to the
EN