Video System Selection - Sanyo PLC-XU305A Owner's Manual

Video System Selection

1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
►

Use the Point buttons to select Video , S-video or
▲▼
Computer 1(Component) and then press the Point
or SELECT button.
3
Use the Point buttons to select System and then
▲▼
press the Point or SELECT button. Use the Point
►
buttons to select the desired system and then press
▼
SELECT button.
Video or S-Video
Auto
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
PAL/SECAM/NTSC/NTSC.3/PAL-M/PAL-N
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC .3, PAL-M and PAL-N.
Component
Auto
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, select
a specific component video signal format among 0i, 55i,
0p, 55p, 0p, 1035i and 100i.
Note:
The AV System Menu cannot be selected when selecting
RGB (Scart).
buttons to select Input and
▲▼
or SELECT button.
AV System Menu (Video or S-Video)
►
▲
AV System Menu (Component)
Video Input
System Component
1