Menu Bar - Sanyo PLC-XU305A Owner's Manual

Basic Operation

Menu Bar

For detailed functions of each menu, see "Menu Tree" on pages 70-71.
Main Menu










 Input
Used to select an input source from Computer 1, Computer  ,Video, S-video or Network
 PC adjust
Select Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area H and Display area V to adjust the
parameters to match with the PC input signal format (p.33).
 Image select
For computer source, used to select an image mode among Dynamic, Standard, Real, Blackboard(Green), Colorboard
and image 1 -  (p.35).
For Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green) , Colorboard
and Image 1-  (p.42).
 Image adjust
For computer source, used to adjust computer image [Contrast, Brightness, Color temp., white balance (R/G/B),
Sharpness and Gamma] (pp.36-37).
For Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp., white balance (R/G/
B), Sharpness, Gamma, Noise reduction and Progressive] (pp.43-44).
 Screen
For computer source, used to adjust size of the image [ Normal, True, wide, Full, Custom and Digital zoom +/–] (pp.36-37).
For Video source, used to Used to set size of image [Normal, wide and Custom] (p.45).
 Sound
Used to adjust the volume or mute the sound (p.26).
 Setting
Used to set the projector's operating configurations (pp.46-59).
 Information
Display the input source information: Input , H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp
counter, Power management, Key lock, PIN code lock and Remote control (p.60).
 Network
See owner's manual "Network Set-up and Operation".
 Guide
The key operation is displayed.

Sub-Menu
RGB
RGB(PC digital)
Wired 1
(pp.29-30,39-40).