Image Adjustment - Sanyo PLC-XU305A Owner's Manual

Computer Input

Image Adjustment

1
Press the MENU button to display the On-Screen
Menu. Use the Point
Adjust and then press the Point

Use the Point
▲▼
and then press the SELECT button to display the
adjustment dialog box. Use the Point
adjust the setting value.
Contrast
Press the Point button to decrease the contrast; press the
◄
Point button to increase the contrast (from 0 to 63).
►
Brightness
Press the Point button to decrease the brightness; press
◄
the Point button to increase the brightness (from 0 to 63).
►
Color temp.
Use the Point buttons to select the desired Color temp.
◄►
level (XLow, Low, Mid or High ).
white balance (Red)
Press the Point button to lighten red tone; press the Point
◄
button to deepen red tone (from 0 to 63).
►
white balance (Green)
Press the Point button to lighten green tone; press the
◄
Point button to deepen green tone (from 0 to 63).
►
white balance (Blue)
Press the Point button to lighten blue tone; press the
◄
Point button to deepen blue tone (from 0 to 63).
►
Sharpness
Press the Point button to decrease the sharpness of the
◄
image; press the Point
of the image (from 0 to 15).
Gamma
Use the Point buttons to adjust the gamma value to
◄►
obtain a better balance of contrast (from 0 to 15).
Reset
To reset the adjusted data, select Reset and press the
Point SELECT button. A confirmation box appears and
► or
then select yes. All adjustments will return to their previous
figures.
3
buttons to select Image
▲▼
► or SELECT
buttons select the desired item
buttons to
◄►
button to increase the sharpness
►
Image Adjust Menu
button.
Note:
• When white balance Red, Green or Blue is
adjusted, Color temp. will change to User.
• When Blackboard(Green) or Colorboard
is selected in Image select, Color temp. will
change to Blackboard or Colorboard.
Selected Image mode
Use the Point
◄►
buttons to adjust the
setting value.